Skip to main content
Fig. 3 | BMC Oral Health

Fig. 3

From: Comparison of digital and silicone impressions for single-tooth implants and two- and three-unit implants for a free-end edentulous saddle

Fig. 3

Measurement of the misfit of the scan body using Geomagic Control. a STL data of a plaster model of a single-tooth implant. b STL data of a single-tooth implant obtained from the IOS. c STL data of a plaster model of a two-unit implant. d STL data of a two-unit implant obtained from the IOS. e STL data of a plaster model of a three-unit implant. f STL data of a three-unit implant obtained from the IOS. g The scan-body misfit was designated as A. h The misfit on the mesial side was designated as B1 and that on the distal side as B2. i The misfit on the mesial side was designated as C1 and that on the distal side as C2. STL standard triangulated language, IOS intraoral scanner

Back to article page

BMC Oral Health

ISSN: 1472-6831

Contact us