Skip to main content
Fig. 2 | BMC Oral Health

Fig. 2

From: Antifungal activity, mechanical properties, and accuracy of three-dimensionally printed denture base with microencapsulated phytochemicals on varying post-polymerization time

Fig. 2

Flexural strength values (MPa) of bar-shaped 3D-printed denture base resin specimens subjected to different post-polymerization time (PPT) protocols: 5-min, 10-min, 20-min, and 30-min. Control: 3D-printed denture base resin specimens without microcapsules; Capsule: 3D-printed denture base resin specimens with 5 wt% phytoncide-filled microcapsules. Significant differences between the groups are marked with black lines (P < 0.05). Flexural strength value of 65 MPa is marked in red dotted line

Back to article page

BMC Oral Health

ISSN: 1472-6831

Contact us