Table 1 Printing parameters and materials for manufacturing the zirconia specimens on a CeraFab System S65 Medical
From: Wear behaviour of lithography ceramic manufactured dental zirconia
Ceramic Material | LithaCon 3Y 210 |
Layer height | 25 μm |
Layer time | 36 s |
Exposure Intensity Starting Layers | 110 mJ/cm² |
Exposure Intensity General Layers | 110 mJ/cm² |
Lateral (X.Y.) shrinking compensation | 1.27 |
Build direction (Z) shrinking compensation | 1.30 |
Z curing depth compensation | Off |
Z curing depth compensation layers | 0 |
Contour offset | 0 μm |
Support structures | None |
Vat type | UHC with CeraVat F |
Adhesive promoter | LithaFoil |
Cleaning Fluid | LithaSol 30 |