Use of T-Scan III in analyzing occlusal changes in molar fixed denture placement

Background This study aims to analyze the longitudinal variation of occlusal force distribution prior to and after fixed restoration for molar full-crowns with T-SCAN III which provide reference for occlusal adjustment and long-term maintenance. Methods We enrolled a total of 20 patients who received conventional restorative treatment for molars. The occlusion examination was conducted in 3 stages (before placement, immediately after placement, and 3 months after placement) using T-SCAN III (Tekscan South Boston, MA, USA, 10.0) to examine and measure the occlusal contact areas of the full dentition. Results The results indicated that the occlusal force distribution in the molar region of the patients changed before and after the fixed restoration, but the percentages of occlusal force in the dental arch of the molar did not differ significantly before and after the restoration (P > 0.05). Three months after the fixed restoration, the percentage of occlusal force in the restored dental arches of lateral teeth increased significantly (P < 0.05). Conclusion The results of this study indicated that the occlusal forces of the patients changed with tooth movement and adaptation, which is mainly reflected in the increasing occlusal force. Quantitative occlusal force analysis using T-SCAN III occlusal analyzer can provide more objective and accurate data to effectively guide clinical occlusion adjustments. Supplementary Information The online version contains supplementary material available at 10.1186/s12903-024-04014-1.


Background
Tooth loss and damage have a direct effect on occlusion.A good occlusal relationship is also essential for the coordination of the physiological functions of the oralmaxillary system.The purpose of dental restoration is to restore the occlusal relationship to its original state.Occlusal analysis is important in the restoration process [1].If the occlusal premature contact of a restoration exceeds the physiological limits of the patient, not only can the restoration cause tooth sensitivity, but it can also worsen periodontal disease, leading to masticatory muscle pain and temporomandibular disorders (TMDs) [2,3].With the advancement of technology and the development of society, increased demands have emerged for the identification and mitigation of occlusal interferences, and the success rate of restorative treatment has increased.It is important to obtain reliable occlusion records and ensure proper occlusal contact in restorative dentistry [4].Obtaining an accurate occlusion record and communicating it to the dental technician is vital for making prosthetics and restorative treatment [5].In dental treatment, occlusion adjustment refers to the selection and grinding of occlusal premature contact, removal of premature contact, adjustment of the patient's occlusal contact and muscle tissues, and coordination of the temporomandibular joint and central nervous system, thereby restoring normal physiological function and oral and maxillofacial systems.
With the development of 3D scanning techniques,quantitative and optimal results make it possible to achieve accurate occlusion relationgship [6][7][8], such asT-SCAN, etc. T-SCAN (Tekscan South Boston, MA, USA, 10.0) is one of the most effective tools for analyzing occlusal contact, occlusal time, and their relationship (Figs. 1 and 2).It detects, in increments of 0.003 s, the sequence of each tooth contact, the position of force on each tooth surface at the point of contact, the percentage of relative occlusal force, and the trajectory center of resultant force.Using T-SCAN III, Kerstein accurately analyzed the stress distribution in the dental arch, the maximum occlusal force, and the initial contact to determine if the occlusal stress contact is destructive [9].This system uses dynamic images to measure the contact position and excessive stress distribution at the initial contact point.If excessive stress can be precisely eliminated, the lifespan of prostheses can be extended.Also, the occlusal  sensing film scanned by T-SCAN, has no impact on occlusal force, is unaffected by saliva and can be reused 15 to 25 times [10,11].
The purpose of this study was to examine the effect of crown and bridge restoration treatment for a single molar on occlusal force redistribution and to assess the changes in occlusal force distribution of the restoration and the possible influencing factors at each stage, as well as to investigate the feasibility of using T-Scan to quantify the occlusal contacts of the restorations and provide more objective and accurate information to assist patients in restoring stable occlusal function.

Materials and methods
In this prospective study, we conducted occlusal measurements at 3 stages: preoperative, postoperative, and the third month after surgery.This study was approved by the Medical Ethics Committee of Ji'nan University (approval number.JNUKY-2022-045).All patients included in the study signed the surgical informed consent form.

Sample size calculation
The sample size was determined using experimental research methodology [12].The standard deviation σ was 2.5 units, the two sides α was 0.05, and the test efficiency of 1-β was 0.90 for the difference in occlusal force of the patients in this study.According to the calculations, with a standard deviation of 2.5 units for the sample occlusal force (s = σ = 2.5), a standard deviation of 2 units for the change in occlusal force (δ = 2), an α level of 0.05, a Zα/2 value of 1.96, a β level of 0.10, and a Zβ value of 1.282, the required sample size was 16.42, meaning that at least 17 participants were needed for the study.The sample size was calculated according to the formula: The asymmetry occlusal force index (AOF) reveals the difference in occlusal force between the left and right sides and is calculated as follows [13]: AOF (%) = occlusal force of left side -occlusal force of right side/total occlusal force × 100%.

Inclusion and exclusion criteria
Patients older than 18 years with good periodontal health and no more than 3 units of single crown or fixed denture restorations in the molar region met the inclusion criteria.
Patients were excluded from the study if they presented with TMJ pain, had a history of periodontitis, used analgesics and anesthetics during the observation period, received treatment including occlusion adjustment, orthodontic treatment, extraction or implant restoration.

Occlusal parameters
On the day of the visit, prior to crown placement, the patients were seated upright in a dental chair (with the Frankfort horizontal plane parallel to the floor) (Fig. 3).The T-SCAN III (Tekscan South Boston, MA, USA, 10.0) was then inserted into the mouth of the patients, and they were instructed to bite firmly three times at the maximum cusp intersection position (MIP) (Fig. 4).
Dental preparation was performed according to the fixed restoration benchmarks (1.5-2.0 mm occlusal restoration, 1.0-1.5 mm axial restoration, and marginal position no more than 0.5 mm subgingival).Impressions were made, and crown and bridge restorations were made.Then, the dental surgeon used articulating paper (Arti-Check BK09, Bausch, USA) for occlusion adjustment.
At 30 min post-crown placement and at the 3-month postoperative follow-up, the digital sensor (T-SCAN III) was reused, and the average of the 3 measurements was calculated for analysis.The patients' responses to the standard questionnaire used in the study (Questionnaire 1), formulated based on the questionnaire developed by Chaithanya [14], were also recorded.The questionnaire was designed to measure (1) how well the teeth

Statistical analysis
Statistical analyses were performed using SPSS 26.0 software with continuous type variables that follow normal distribution expressed as mean ± standard deviation.Percentage of occlusal force, Occlusion time, and Disclusion time of the mesial and distal adjecent teeth of the restored arch, contralateral arch, and restored tooth position were tested using paired t-tests with a test level of α = 0.05 (bilaterally) for the restored arch, contralateral arch, restored tooth position, and for the mesial and distal adjecent teeth of the restored arch, pre-restorations, and post-restorations.For samples that did not follow the normal distribution, the data were expressed as median (25th, 75th percentile), and differences between the groups were compared using Wilcoxon signed rank-sum test.

Results
We enrolled 20 patients (11 females and 9 males, all over 18 years of age with a mean age of 44.55 ± 12.13 years) who received crown or bridge restorative treatment for molars at the Zenith Dental Clinic in Macau between June 2020 and December 2021.Details of gender, age, position of the restored teeth, and history of smoking and alcohol consumption are provided in Table 1.
Due to the COVID-19 epidemic delaying the followup time and increasing the missed visit rate, 15 of the 20 patients (8 females, 7 males, mean age of 46.33 ± 13.56 years) successfully completed the 3-month follow-up, and the data were statistically reanalyzed.

Comparison of occlusal contact before and after fixed restorations
Table 2 displays the T-SCAN occlusal data of patients before and after fixed restorations.The percentage of occlusal force on both sides of the arch did not change significantly after restoration (P > 0.05).However, the

Effect of articulating paper on the occlusal force of the restorations
Although restoration was performed under articulating paper guidance until both the patient and the dentist were satisfied, 15% of patients still had occlusal discordance, as shown in Fig. 5.

Analysis of occlusal contact by the follow-up at the third month after surgery
The T-SCAN occlusal information after restoration is presented in   after restoration, but the difference was not statistically significant (P > 0.05).

Data analysis of occlusion time and disclusion time
The Occlusion Time before and after bonding was (0.37 ± 0.08) s and (0.23 ± 0.05) s, respectively, and the Occlusion Time was significantly shorter after bonding, but the difference was not statistically significant (P > 0.05); the Occlusion Time 3 months after restoration was (0.28 ± 0.20) s.The mean Occlusion Time was (0.17 ± 0.04) s before and (0.21 ± 0.05) s after restoration, with increased disclusion time, but the difference was not significantly different (P > 0.05).There was no significant difference between the time to prosthesis detachment in the immediate postoperative period and 3 months post-surgery.
Based on the Occlusion time results (Table 4), the coordination of the muscle position with the maximum cusp interposition improved after the restoration.Also, the occlusal contact of the restored tooth improved over time, approaching the manufacturer-recommended occlusion time standard after 3 months.Thus, the fixed restoration assisted in restoring the occlusal force and coordination of masticatory muscles.

Relationship between fixed prosthetic occlusion and comfort
Subjective analysis 3 months after the restoration revealed that the occlusion comfort and masticatory efficiency improved significantly, the eating habits of the patients improved, with 80% of patients being able to chew hard foods, and their sensory balance contact at the back of the restored teeth increased from 26 to 80% before and after the restoration.Patients were pleased with the therapeutic outcomes, which achieved the therapeutic objectives (Table 5).

Comparison of T-SCAN and articulating paper in adjusting the occlusion
The occlusion was adjusted using articulating paper and T-SCAN and both groups were given questionnaires.In terms of efficiency and comfort, the results revealed that T-SCAN-guided occlusion adjustment was superior to articulating paper-guided occlusion adjustment (Table 6).

Asymmetry occlusal force index
The mean asymmetry occlusal force index was 20.09% prior to restoration, 20.48% after treatment, and 17.11% three months after treatment.The asymmetry occlusal force index was not significantly different at the three time points, but it decreased significantly after three months and approached the mean value of the normal population [14].This may be due to the short-term lateralized masticatory habits of the patients because of discomfort during treatment and the inability of the occlusal forces on both sides to adapt to this habit after surgery.Three months after restoration, the masticatory muscle groups were appropriately exercised, the occlusal force of the restored side was improved, and the difference in bilateral occlusal force decreased.

Discussion
In natural dentition, several factors, such as tooth wear, periodontal disease, TMDs, orthodontic treatment, and tooth eruption, can influence occlusal force distribution and occlusal contact [15,16].In this study, we excluded factors such as severe periodontal disease, TMDs, and orthodontic treatment that can alter occlusal forces and focused on local occlusal changes of the fixed restorations.
After restorative treatment, the dental defect is repaired, and the occlusal force should increase.The results of this study indicated that 30 min after restoration, the occlusal force of the restoration did not increase, but decreased.This may be because the restored abutment must withstand not only the maximum occlusal force it can withstand, but also the maximum occlusal force of the contralateral molar transferred by the bridge and crown, which exceeds the abutment's own bearing capacity.The body inhibits the masticatory muscles on the restorative side through a feedback mechanism that exists between the periodontal receptors, the center, and the masticatory muscles, thus reducing the maximum resultant force exerted on the fixed abutment to a level that the abutment can withstand.Simultaneously, the maximum resultant force acting on the remaining teeth on the restorative side is reduced.Also, many patients experience discomfort and limitations on the affected side due to a fractured or missing tooth, limiting their ability to chew on that side prior to treatment.As a result, short-term unilateral mastication occurs.Considering all the above factors, we hypothesize that lateral chewing caused an imbalance in the occlusion of both sides of the dental arch of the molar following full-crown restoration, resulting in a greater occlusal force and contact area on the non-restored side of the arch.
The percentage of occlusal force of the restored teeth increased significantly after three months, due to the adaptability of the lateral side of the restoration to the new occlusal contact.For fixed abutment teeth, the change in occlusal force altered the periodontal support tissues and substantially increased the support capacity of the teeth with an abutment, increasing the maximum occlusal force within their bearing capacity and restoring the maximum occlusal force of the other teeth.Thereby, the percentage of occlusal force increased in the adjacent teeth to the restorations, but the difference was not significant because some of the restorations were located at the free end and the distal adjacent teeth were not present.
Zheng investigated the changes in occlusal forces of full-crown restorations and analyzed the occlusal forces of patients before placement, immediately after placement, and 2 months, 4 months, and 6 months after restoration; the results demonstrated that the occlusal force of both the restoration and the restoration side decreased, which is consistent with our findings [17].Specific results indicate that the occlusal force on both sides of the arch began to decrease immediately after restoration, and after 4 months, the occlusal force on both sides of the arch returned to the pre-restoration level.Also, 6 months after the restoration, the occlusal force on the restored side increased significantly.The study by Zheng also indicated that, over time, psychological adaptation and dental treatment reduced patients' anxiety, allowing them to re-adjust to chewing and regain their occlusal force.
Although restoration was performed under articulating paper guidance until both the patient and the dentist were satisfied, T-SCAN revealed that 15% of patients still exhibited occlusal discordance.Articulating paper was used for static occlusal force detection.According to numerous occlusion textbooks, the marked area represents the load contained within the marker [18].Large, dark markers are recommended for heavy occlusal loads, whereas small, light markers are recommended to indicate light occlusal loads [19].However, research has revealed a low correlation between articulating paper markers and the T-SCAN occlusal force concentration regions.Frequently, a small marker indicates a high force concentration.However, a large, dark marker does not indicate heavy force.Articulating paper-oriented orthodontics also depends on the patient's occlusal sensory feedback, which can be variable.When using articulating paper, patients must repeatedly bite to obtain occlusal marks.However, repeated occlusion fatigues the masticatory muscle and reduces the pressure perception in the periodontal ligament, which may result in deviations [20].Also, after tooth extraction, important sensory conduction during mastication is lost due to the disappearance of receptors in periodontal ligaments [21].These physiological sensations prevent the tooth and oral system from sensing unfavorable occlusal forces, which can lead to restoration failure and tooth loss [21,22].
Advancements in dentistry have increased the need for visualization of dental and associated for the diagnosis and treatment [6].Unlike traditional occlusal examination methods such as articulating paper, T-SCAN can accurately obtain occlusal force distributions, relative occlusal force values, and occlusal time series without relying on the psychological influence of the patient and the physician [23].The quantitative occlusal images generated can be viewed multiple times by doctors without requiring the patient to bite repeatedly.Thus, T-SCAN III facilitates more precise occlusal alignment.These benefits have made it applicable to a wide range of oral restorations, allowing for a more thorough analysis of the distribution and changes in occlusal force throughout the treatment process.
The T-SCAN system can also measure OcclusionTime and Disclusion Time to determine changes [11,24,25].A comprehensive analysis of occlusal contact characteristics using this system can be performed for clinical and scientific purposes.Occlusion Time was found to be directly related to the patient's occlusal contact pattern [26] and is believed to accurately reflect occlusion [27], whereas Disclusion Time is related to tooth contact and muscle activity [28].Abnormal Disclusion Time can result in alterations in muscle activity, which may lead to TMDs [29].This enables dentists to detect and precisely adjust subtle interferences by patients to improve the occlusion of dental implants.
This study is limited by the potential for bias due to its small sample size and short follow-up period.The rate of missed appointments after 3 months was 25% (5 out of 20 cases), suggesting that this was only a pilot study.As T-SCAN utilizes force percentages rather than absolute force values, and because combined treatment plans and long-term efficacy are influenced by a number of factors, larger sample sizes are required for randomized clinical studies.

Conclusion
Three months after fixed restoration, the occlusal force distribution in the molar region of the patients changed with time, which is mainly reflected in the increasing occlusal force.At the same time, occlusion time, disclusion time, and asymmetry occlusal force index tended to decrease, indicating that the distribution of occlusal force on both sides of dental arch is more ideal.Quantitative analysis of T-SCAN III can provide clinicians with more objective and precise data, allowing them to enhance the accuracy of occlusal analysis and increase the success rate of restorative treatments.

Fig. 3
Fig. 3 Patient with chair in sitting position

Fig. 5
Fig. 5 After crown cementation and adjustment, T-scan III 2D and 3D information

Table 1
Patient information and restoration tooth position

Table 2
Occlusion changes in indicators before and after crown restoration ( x ± s ) 4ig.4Place T-scan handle uniform bite in ICP 3 times was recorded percentage of occlusal force of mesial adjacent teeth increased slightly after restoration [(7.94 ± 1.82)%], as compared to before restoration [(6.27 ± 1.44)%], with no statistically significant difference observed (P > 0.05).

Table 3
Occlusion changes in indicators before and after 3 months of crown restoration

Table 4
OT, DT at three time points

Table 5
Comparison of patient's response before versus after prosthetic treatment

Table 6
Comparison of tekscan and articulating paper occlusal adjustment