Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering

Table 2 Conventional and speed sintering cycles protocols

Sintering Cycle	Start Temp	Heating rate first stage	Max Temp first stage	Holding time	Heating rate second stage	Max Temp second stage	Holding time	Cooling rate	Cooling to
Conventional Sintering	Room temp	10 °C/min	900 °C	20 min	5 °C/min	1500 °C	120 min	10 °C/min	300 °C
Speed Sintering	Room temp	90 °C/min	900 °C	30 min	60 °C/min	1500 °C	60 min	60 °C/min	300 °C

ISSN: 1472-6831