Table 6 Mechanical analysis of the screws: the axial displacements of screws of commercial reconstrction plates, 12 mm-height reconstrction plates, 16 mm-height reconstrction plates and 20 mm-height reconstrction plates under INC and MOL-L. * ”L” represents the screw fixed to the meial bone tissue. “L1”-”L6” is from bottom to top and from left to right; ”R” represents the screw fixed to the distal bone tissue. “R1”-”R6” is from bottom to top and from left to right
axial displacements of screws(/mm) | L1* | L2* | L3* | L4* | L5* | L6* | R1* | R2* | R3* | R4* | R5* | R6* | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Commercial Reconstruction plate | INC | 0.323 | 0.314 | 0.312 | 0.318 | 0.215 | 0.221 | 0.230 | 0.238 | ||||
MOL-L | 0.375 | 0.355 | 0.353 | 0.368 | 0.107 | 6.3 × 10− 2 | 1.8 × 10− 2 | -2.9 × 10− 2 | |||||
12 − 2.0 | INC | -2.6 × 10− 2 | -2.8 × 10− 2 | -2.5 × 10− 2 | -2.4 × 10− 2 | -0.437 | -0.463 | -0.379 | -0.406 | ||||
MOL-L | 0.129 | 0.128 | 0.131 | 0.132 | -0.456 | -0.513 | -0.364 | -0.433 | |||||
12 − 2.4 | INC | -5.5 × 10− 2 | -6.9 × 10− 2 | -4.0 × 10− 2 | -3.4 × 10− 2 | -0.320 | -0.331 | -0.279 | -0.289 | ||||
MOL-L | 4.1 × 10− 2 | 2.6 × 10− 2 | 5.9 × 10− 2 | 6.5 × 10− 2 | -0.326 | -0.360 | -0.263 | -0.304 | |||||
12 − 2.8 | INC | -5.0 × 10− 2 | -6.0 × 10− 2 | -3.8 × 10− 2 | -3.4 × 10− 2 | -0.339 | -0.379 | -0.271 | -0.320 | ||||
MOL-L | 4.0 × 10− 2 | 2.9 × 10− 2 | 5.4 × 10− 2 | 5.9 × 10− 2 | -0.327 | -0.383 | -0.246 | -0.315 | |||||
16 − 2.0 | INC | 1.1 × 10− 2 | 1.7 × 10− 2 | 2.2 × 10− 2 | 1.8 × 10− 2 | 2.1 × 10− 2 | -0.166 | -0.178 | -0.186 | -0.146 | -0.156 | ||
MOL-L | 0.103 | 0.110 | 0.114 | 0.115 | 0.119 | -0.184 | -0.218 | -0.240 | -0.167 | -0.194 | |||
16 − 2.4 | INC | 3.0 × 10− 2 | 3.2 × 10− 2 | 3.2 × 10− 2 | 4.3 × 10− 2 | 4.6 × 10− 2 | -0.122 | -0.127 | -0.127 | -0.104 | -0.109 | ||
MOL-L | 0.126 | 0.128 | 0.127 | 0.143 | 0.147 | -0.122 | -0.149 | -0.168 | -0.108 | -0.131 | |||
16 − 2.8 | INC | -4.2 × 10− 2 | -3.3 × 10− 2 | -2.6 × 10− 2 | -3.2 × 10− 2 | -3.0 × 10− 2 | -3.7 × 10− 2 | -3.6 × 10− 2 | -3.5 × 10− 2 | -2.6 × 10− 2 | -2.6 × 10− 2 | ||
MOL-L | 1.0 × 10− 2 | 1.8 × 10− 2 | 2.2 × 10− 2 | 2.4 × 10− 2 | 2.8 × 10− 2 | -6.3 × 10− 2 | -8.0 × 10− 2 | -9.2 × 10− 2 | -5.2 × 10− 2 | -6.7 × 10− 2 | |||
20 − 2.0 | INC | -9.6 × 10− 2 | -9.5 × 10− 2 | -9.2 × 10− 2 | -9.3 × 10− 2 | -8.3 × 10− 2 | -8.7 × 10− 2 | -0.286 | -0.315 | -0.259 | -0.277 | -0.287 | -0.246 |
MOL-L | -2.6 × 10− 2 | -2.8 × 10− 2 | -1.9 × 10− 2 | -1.9 × 10− 2 | -9.7 × 10− 3 | -1.1 × 10− 2 | -0.306 | -0.365 | -0.274 | -0.312 | -0.331 | -0.275 | |
20 − 2.4 | INC | -0.117 | -0.117 | -0.111 | -0.110 | -0.102 | -0.106 | -0.249 | -0.281 | -0.234 | -0.243 | -0.254 | -0.216 |
MOL-L | -4.7 × 10− 2 | -4.9 × 10− 2 | -3.8 × 10− 2 | -3.6 × 10− 2 | -2.9 × 10− 2 | -2.9 × 10− 2 | -0.261 | -0.324 | -0.231 | -0.272 | -0.293 | -0.239 | |
20 − 2.8 | INC | -0.139 | -0.144 | -0.126 | -0.123 | -0.117 | -0.112 | -0.242 | -0.266 | -0.217 | -0.232 | -0.240 | -0.204 |
MOL-L | -5.7 × 10− 2 | -6.4 × 10− 2 | -4.2 × 10− 2 | -3.8 × 10− 2 | -3.2 × 10− 2 | -2.5 × 10− 2 | -0.246 | -0.310 | -0.216 | -0.257 | -0.278 | -0.223 | |