Skip to main content
Fig. 3 | BMC Oral Health

Fig. 3

From: Digital technique to analyze the wear of screw-retained implant supported metal-ceramic dental prostheses and natural tooth as antagonist: a pilot study

Fig. 3

(A) Alignment procedure between STL1 and STL2 and (B) STL1 and STL3 digital files of the segmented natural tooth. (C) Alignment procedure between STL1 and STL2 and (D) STL1 and STL3 digital files of the screw-retained implant-supported metal-ceramic dental prostheses. (E) Spectrum values used in (A–D). Warm colors represent a volume increase, cold colors represent a volume decrease, and green represents an accurate alignment

Back to article page

BMC Oral Health

ISSN: 1472-6831

Contact us