Skip to main content
  • Research article
  • Open access
  • Published:

The application of virtual reality and augmented reality in Oral & Maxillofacial Surgery

Abstract

Background

Virtual reality is the science of creating a virtual environment for the assessment of various anatomical regions of the body for the diagnosis, planning and surgical training. Augmented reality is the superimposition of a 3D real environment specific to individual patient onto the surgical filed using semi-transparent glasses to augment the virtual scene.. The aim of this study is to provide an over view of the literature on the application of virtual and augmented reality in oral & maxillofacial surgery.

Methods

We reviewed the literature and the existing database using Ovid MEDLINE search, Cochran Library and PubMed. All the studies in the English literature in the last 10 years, from 2009 to 2019 were included.

Results

We identified 101 articles related the broad application of virtual reality in oral & maxillofacial surgery. These included the following: Eight systematic reviews, 4 expert reviews, 9 case reports, 5 retrospective surveys, 2 historical perspectives, 13 manuscripts on virtual education and training, 5 on haptic technology, 4 on augmented reality, 10 on image fusion, 41 articles on the prediction planning for orthognathic surgery and maxillofacial reconstruction. Dental implantology and orthognathic surgery are the most frequent applications of virtual reality and augmented reality. Virtual planning improved the accuracy of inserting dental implants using either a statistic guidance or dynamic navigation. In orthognathic surgery, prediction planning and intraoperative navigation are the main applications of virtual reality. Virtual reality has been utilised to improve the delivery of education and the quality of training in oral & maxillofacial surgery by creating a virtual environment of the surgical procedure. Haptic feedback provided an additional immersive reality to improve manual dexterity and improve clinical training.

Conclusion

Virtual and augmented reality have contributed to the planning of maxillofacial procedures and surgery training. Few articles highlighted the importance of this technology in improving the quality of patients’ care. There are limited prospective randomized studies comparing the impact of virtual reality with the standard methods in delivering oral surgery education.

Peer Review reports

Background

Virtual reality “near reality” is the art and science of creating a virtual environment that provides a standardized, safe and flexible platforms for the assessment of various anatomical regions of the body for examination, diagnosis, planning and for the surgical training. To achieve this objective the user of this technology should be exposed to a realistic multidimensional visual stimulus. This to allow the full integration of cognitive, motor and mental functions of the operator. So, virtual reality describes a 3D computer generated environment which can be readily explored and interacted with by a person [1].

Augmented reality combines virtual reality with a 3D real environment specific to individual patient via a sophisticated registration process to achieve an integral image which augments the virtual scene with the real one. The integrated image is superimposed on the real environment using semi-transparent glass [2].

Based on the level of presence experienced by a user, virtual reality technology can be broadly classified into immersive virtual reality and non-immersive virtual reality. The basic elements of immersive reality experience include interactivity and involvement of the user within the virtual environment to create a sense of being “present” in the environment. Immersive virtual reality combines virtual reality with the added characteristics of the captured environment to provide the operator the sense of being in the scene, able to visualise the recorded image in 3D, and interact using a sophisticate wearable device that detects eye movements and track leap motions of the hands. Non-immersive virtual reality involves computer generated experiences on a desktop, while the user interacts with a mouse, in a virtual environment. Conventional surgical simulations fall under this category [3].

The advances in computing power have made simulated images much more realistic and much faster to create. The concept of virtual reality requires the development of specialised software to manipulate the recorded 3D images of the dental and oro-facial morphology. Therefore, it is important to highlight the existing methods of recording the 3D dental, skeletal and soft tissue structures of the dentofacial anatomy and be cognisant of the strength and the limitation of each method.

Different techniques have been developed for capturing dental, facial soft tissue and hard tissue data to produce 3D virtual models for the analysis and surgical planning. These techniques helped to overcome the drawbacks of the 2D photographs and radiographs. Four main types of 3D imaging systems have been used to capture dental and oro-facial structures which include cone-beam computed tomography (CBCT) Laser scanner, structured light scanner, and stereophotogrammetry [4]. These are essential for virtual planning of the surgical correction of dento-facial deformities, maxillofacial reconstruction after cancer resection and the simulation of facial fractures. The 3D acquisition of the various tissues of the head and neck region provides a realistic platform for maxillofacial training. The recorded images can be superimposed into the patient, using semi-transparent glasses, to allow the surgical procedure to be carried out in environment of augmented virtual reality.

CBCT is a 3D radiographic imaging of the craniofacial region; it is also known as “digital volume topography”. Even though CBCT is excellent in the imaging of hard tissue, the soft tissues are of poor contrast and the method does not produce the normal photorealistic appearance and the texture of the skin of the face. The stereophotogrammety allows the 3D recording of facial texture which can be easily superimposed the 3D surface image of the CBCT. The time required for image acquisition is less than one millisecond, and it is highly accurate and reliable for the capture of face morphology. The capture 3D iumage of the skin can be accurately superimposed on the CBCT to produce a photorealisatic image of the faceover the captured facial skeleon [5].

Image artefacts are another limitation of CBCT, artefacts such as streaking, shading, and distortion are usually produced due to the presence of metallic restoration, fixed orthodontic appliances, or implants that are affecting the quality of the images. Therefore, the image of the defective dentition of the CBCT is usually replaced with the 3D image of the scanned dental models using either CT or laser scanner. The fusion of the images can be also achieved between the CBCT and the intra oral scans for orthognathic surgery planning, the accuracy of the method was within 0.5 mm [6].

Aim of the study

Provide an over view of the literature on the application of virtual and augmented reality in oral & maxillofacial surgery.

Methodology

We reviewed the literature and the existing database using Ovid MEDLINE search, Cochran Library and PubMed. All the studies in the English literature in the last 10 years, from 2009 to 2019, related to the application on virtual and or augmented reality in oral & maxillofacial surgery were considered. A set of key words guided the literature search including 3D, virtual reality, augmented reality, oral & maxillofacial surgery, dental and training. Key articles based on a robust methodology, adequate sample size and novel applications were retrieved for evaluation and the findings were presented in this manuscript.

Articles related to the detailed programming for virtual reality, abstracts, conference proceedings, letters to the editor, single case report, and those related to software development were excluded.

Results

We identified 101 articles related the broad application of virtual reality in dentistry and oral & maxillofacial surgery. These were subdivided as follows; Eight systematic reviews [7,8,9,10,11,12,13], (Table 1), 4 expert reviews, 9 case reports, 5 retrospective surveys, 2 historical perspectives, 13 manuscripts on virtual education and training, 5 on haptic technology, 4 on augmented reality, 10 on image fusion, 41 articles on the prediction planning for orthognathic surgery and maxillofacial reconstruction. The results will be presented under two main categories, clinical applications and surgical training.

Table 1 Systematic reviews on the application of virual reality and augmented reality in oral and maxillofacial surgery

Clinical application

Technological advances in virtual and augmented reality are enabling the application of the methods in dentistry, oral and maxillofacial surgery is the primary area of application, dental implantology and orthognathic surgery are the most frequent application [14]. Most of the publications were on the assessment of the accuracy of virtual planning for orthognathic surgery [15]. Three-dimensional virtual surgery and mandibular reconstruction after cancer resection and reconstruction were the main applications of virtual reality [16]. Virtual planes for mandibular and maxillary reconstruction can be achieved with an excellent match. This was demonstrated on 30 cases of complex head and neck reconstruction including the planes of the resection, the length of the segmental defect and the distance between the transplanted segments and the remaining bone. There was excellent match between the virtual plans and the achieved results [17].

In a series of case reports the virtual surgical planning and hardware fabrication for open reduction and internal fixation of atrophic edentulous mandibular fractures were demonstrated [18,19,20].

In dental implantology, the accurate placement of dental implants is essential to meet the required functional and aesthetic demands [21]. Virtual reality has been extensively applied using the preoperative CBCT to determine the implant size, position, direction and proximity to vital structures. Various software packages are available for the virtual planning of dental implants [22]. The 3D virtual planning is then transferred onto the surgical field via either the static guide or the dynamic navigated approach [23].. The static transfer of the surgical plan is based on the virtual designing followed by fabrication of a surgical guide using computer-aided-design/computer-aided-manufacturing (CAD/CAM) to facilitate the insertion of dental implants. Various types of surgical guides are available based on the type of support, bony, mucosal or dental. A remarkable accuracy can be achieved with the sleeve-in-sleeve template is used in which multiple sleeves are applied and fixed to the surrounding bone to improve the precision of insertion of dental implants [24]. Various static guiding systems are available based on the CAD/CAM technology which includes EasyGuide, GPIS, Impla 3D, InVivoDental, Implant 3D, Nobel Bioguide and VIP (Implant Logic System) [25].

On the other hand, the dynamic navigation allows the real time adjustment of the direction of dental implant during surgery based on the virtual preoperative planning.

One of the main advantages of the dynamic navigation is the operator flexibility of changing the implant position to avoid compromised bony foundation and anatomical structures that may have not be detected during the presurgical planning phase. A high level of accuracy has been reported with the image guide implantology (IGI) system with an overall navigation error of 0.35 mm (and a mean angular deviation of less than 4 degrees [26]. However, it must be emphasised that the technology requires an expensive hard ware, significant learning curve and a rigorous intra-operative referencing and orientation process. Moreover, a disrupted surgical procedure may be encountered due to sensors being blocked during the navigation process.

No doubt, the virtual computerized implant dentistry has opened a new horizon in the management of complex cases where the anatomy of the jaw bones has been altered due to trauma or pathology. It improved the accuracy of implant placement where minimally invasive surgery is required in those who suffer from blood dsycrasias and radiation related bone damage.

Navigation within a virtual environment has been successfully used for the during orthognathic surgical [27], and for the repositioning of the maxilla to correct facial asymmetry [28]. The accuracy of the method was evaluated on 15 patients and ranged from 0.9 to 2 mm. An overview on the indication and the application of computer assisted navigation in oral and maxillofacial surgery was carried out on 104 cases, including 37 zygomatico-orbital maxillary fractures, 27 unilateral TMJ ankylosis, 29 craniofacial fibrous dysplasia, 9 mandibular hypertrophy, 3 bone tumours, two foreign body cases [29]. All the surgeries were performed under the guidance of the navigation system based on the preoperative simulation and superimposing the procedure in real time. The accuracy of the navigation system was assessed by measuring the discrepancies between the achieved results and the virtual plans. The mean error was 1.4 mm, it was concluded that navigation surgery is useful as it improved the accuracy of the performed procedure and reduced operation risks.

The application of augmented reality was mainly in dental implant placement and orthognathic surgery. A novel augmented reality system for displaying alveolar nerve bundles in maxillofacial surgery was recently developed. A novel approach based on fiducial markers within an occlusal splint was used to establish a relationship between the virtual image and the real object. The systems promise a broad clinical application [30]. The application of augmented reality system for oral and maxillofacial surgery was investigated [31]. The three-dimensional virtual image of osseous structures was projected into the patient’s body. This helped the surgeons to avoid important structure inside the bone during surgery. Surgical procedures including hole drilling, screw fixation were performed and guided by the augmented reality, the overall precision of the system was within 1 mm.

The application of augmented reality for dental implantology was recently tested in two cases [32]. The study explored the feasibility of a virtual display of the implant position, using specific glasses, on surgical field for surgical navigation in augmented reality. The two virtual environments did not affect the accuracy of the surgical procedure. However, this prove of consent study promises a wider application in maxillofacial surgery.

For an immersive virtual experience, the user wears a head-mounted displays or goggles to engage his visual senses, headphones to engage his auditory senses, and gloves to engage his tactile sense. Rapid advances in technology and research led to the introduction of commercially available high quality immersive virtual reality devices including Oculus Rift (Te 2015) [33], Google Daydream (Google 2017) [34], Gear VR (Samsung, 2015) [35], Goggle Cardboard (Goggle, 2015a) [36] and HTC Vive (Corp 2015) [37]. Among these Google Daydream, Gear VR and Google Cardboard headsets can create a portable virtual reality environment as they work with smartphones. These lead physicians to explore the potential of immersive spherical videos in medical education.

The addition of haptic technology which provides the operator with tactile feedback of the touched or held digital object on the computer screen, has augmented virtual reality and created a more realistic environment for clinical training. Most of the haptic technology applications in immersive virtual environment were carried out on experimental models [38]. A haptic-assisted craniomaxillofacial surgery planning system was applied for the restoration of skeletal anatomy in complex trauma cases [39]. A virtual model was derived from the patient CT data. The developed system combined stereo visualization with six degrees of freedom, high fidelity haptic feedback that enabled the analysis, planning, testing options for restoring bony segmental defects. The system has the potential to be a powerful tool in oral and maxillofacial surgical planning. The literature showed that most of the application of surgical navigation was in orthognathic surgery to improve the accuracy of guiding the osteotomy segment of the jaw bones according to the pre-planned position [11].

Surgical training

Virtual reality has been utilised to improve the delivery of education and the quality of training in dentistry and in oral & maxillofacial surgery [40]. Voxel Man Simulator was used for virtual apicoectomy procedure and found that out of 53 dental students who undertook virtual apicoectomy, 51 were positive regarding the impact of virtual simulation as an additional modality in dental education. The trainees indicated that the integrated force feedback (e.g. simulation of haptic pressure), spatial 3D perception, and image resolution of the simulator were key features for virtual training of the dental surgical procedures. Trainees also developed the ability to self-assess their performance which is a valuable skill in surgery which is essential for the refinement of surgical technique. This study also proposed that application of virtual surgery using the 3D reconstruction of patient’s anatomy might help surgeons to plan complex surgical procedures [41].

Recently, the impact of virtual reality as a training tool for surgical procedures was evaluated in a cross-sectional study to validate a novel virtual simulator for orbital reconstruction, and a training tool in oral and maxillofacial surgery [42]. A novel virtual reality approach based on haptic technology was introduced and validated for computer aided cephalometry. Twenty-one dental surgeons performed a range of case studies using haptic-enabled digital cephalometric analysis. They proved that by providing a sense of touch the errors in cephalometric analysis has been reduced and the landmarking became more feasible and more intuitive [43].

The applicability of using 3D visualisation in dental training was also reported where a haptic dental injection was developed for inferior alveolar nerve block injection as shown in Fig. 1, they also developed a virtual training system (VR-MFS) with advanced haptic feedback and immersive workbench [44]. In addition to drilling, this system allowed cutting and milling aspects of the bones. 3D stereoscopic visualisation on an immersive workbench provided visual, tactile and aural feedback bringing it close to reality. Le Fort 1 maxillary surgery was simulated in this system; the cutting and drilling trajectories and were compared with a preoperative plan for evaluation. The study found that expert surgeons’ trajectories were close to the plan when compared to the novices. Though the experts believed that VR-MFS could be used for skill development, they pointed out that the system lacked realistic simulation that is required for effective training.

Fig. 1
figure 1

Demonstration of haptic technology of injection of the inferior dental nerve (taken from Anderson, P., Chapman, P., Ma, M. and Rea, P. (2013) Real-time medical visualization of human head and neck anatomy and its applications for dental training and simulation. Current Medical Imaging Reviews, 9(4), pp. 298–308

The implementation of web-based virtual patient simulation program to teach dental students oral surgery has been investigated. Virtual reality has improved students’ knowledge and proved to be effective in teaching clinical reasoning and patient evaluation [45].

Recently, the use and the clinical application of virtual reality in pre-clinical dental education was reviewed. Four educational thematic areas were identified which included the simulation hardware, the realism of virtual simulation, scoring system for the assessment of virtual reality and the validation of the emerged systems. Four types of simulators have been used for dental education which included desktop pcs, haptic desktops, and dental skill trainers and digitally enhanced phantom heads. It was clear there were no established educational standards for dental simulators. Most of the available dental simulators have not been validated [46].

On the other hand, a stereoscopic 3D videos using immersive reality was developed (Fig. 2) and its impact on improving the non-surgical skills among trainees was investigated [47]. Based on the 3D computer-generated model of the operating room the trainees can navigate, explore and interact with the digital images of the patient’s data. A Leap Motion sensor tracks the trainee’s hands (Fig. 2) to provide a multi-sensory interactive learning experience. The users were able to choose a specific application and zoom in on certain items within a surgical menu. Through specific gestures the trainees can interact with the anatomy of the maxillofacial region and select the most appropriate surgical instrument to perform certain surgical procedure. The developed programme tests the trainees’ knowledge through a quiz scene. The efficacy of VR Surgery in training novices was assessed. A single-blind prospective randomised controlled trial confirmed that the group of the trainees who used VR Surgery performed better than the control group.

Fig. 2
figure 2

Oculus Rift showing 3D digital data, the operating theatre, the leap motion sensor tracks the trainee’s hands to select items from the menu or apply a surgical instrument (PhD thesis of Yeshwanth Pulijala The University of Huddersfield, 2017)

Virtual reality has been utilised to create a learning environment for training in maxillofacial emergencies to improve knowledge and confidence of junior trainees [48]. The pilot studies showed improved in the two examined domains, further was recommended by the investigators. Following the same theme of virtual surgical simulation, the feasibility of tree-structure architectonic model to simplify virtual orthognathic surgical was explored [49]. This was tested on a group of patients who require orthognathic surgery. The operators were immersed in the virtual environment and tactile feedback was perceived which augmented the training opportunities [49].

The importance of virtual reality in standardizing clinical education to facilitate learning and practicing has been highlighted. The methods encouraged the students to learn by themselves which can reduce faculty time significantly. CDS-100 simulator, designed by EPED Inc. has been shown to be effective computerised tool as it provided 3D real time accurate feedback for endodontic and prosthetic applications. The objective structured clinical examination (OSCE) can be easily incorporated. The authors highlighted the importance of the real time navigation technology in dentistry and emphasised the need for high quality medical images for accurate implementation of the technology [13].

It has been recently highlighted that the current customized augmented reality systems have not been fully validated by independent teams, they provide good results in simple experimental models. The superimposition of digital images is easier on bony structures, therefore, the application of this innovation in oral & maxillofacial surgery is readily achievable and prepare the way for a wider application [50].

Conclusion

In conclusion, virtual reality and augmented reality have contributed to the surgical practice and training in oral & maxillofacial surgery. Few articles highlighted the importance of this imaging innovation in improving the quality of care delivered to patients. The main application of virtual reality is in implantology and orthognathic surgical. Virtual reality facilitated the restoration of orbital floor following blow out fracture and the planning of mandibular reconstruction following cancer resection. There are limited prospective randomized studies to assess the impact of virtual reality with the standard methods of delivering education or carrying out oral surgical procedures. Most of the existing models of simulation focused on the technical skills of the surgical trainees. Non-technical skills including cognitive development, interpersonal communication, teamwork, and emergency management are hardly touched upon except in few studies. The technical skills learnt by the trainees on the virtual surgery simulators are limited but expected to transfer into a stressful environment of operating theatre. However, as a surgical procedure is a combination of expert anatomical knowledge, spatial visualisation, judgment and inter-professional teamwork, it is essential to give a holistic learning experience to the trainees. Hence, there is a gap in the modern simulators developed for dentistry and oral and maxillofacial surgery, which needs to be met adequately. Researchers attempted the use of serious games and gamification of simulations to overcome these training obstacles. Further studies are required to compare the impact of augmented reality in improving the quality of care delivered to patients with the standard approaches.

Availability of data and materials

Existing literature in Ovid & PubMed. The data sheets generated during the current study area available by contacting the first author (AA) via his email address.

References

  1. Freina L, Ott M. A literature review on immersive virtual reality in education: state of the art and perspectives; 2015.

    Google Scholar 

  2. Bartella AK, Kamal M, Scholl I, Steegmann J, Ketelsen D, Holzle F, et al. Virtual reality in preoperative imaging in maxillofacial surgery: implementation of “the next level”. Br J Oral Maxillofac Surg. 2019;57(7):644–8.

    Article  PubMed  Google Scholar 

  3. Kim Y, Kim H, Kim YO. Virtual reality and augmented reality in plastic surgery: a review. Arch Plast Surg. 2017;44(3):179–87.

    Article  PubMed  PubMed Central  Google Scholar 

  4. Ayoub A, Xiao Y, Khambay B, Siebert P, Hadley D. Toward building a virtual human face. Int J Oral Maxillofac Surg. 2007;36(5):423–8.

    Article  PubMed  Google Scholar 

  5. Naudi K, Benramdan R, Brocklebank L, Khambay B, Ayoub A. The virtual human face - superimposing the simultaneously captured 3D photorealistic skin surface of the face on the untextured skin image of the CBCT scan. Int J Oral Maxillofac. 2013;42(3):393–400.

    Article  Google Scholar 

  6. de Waard O, Baan F, Verhamme L, Breuing H, Kuijpers-Jagtman AM, Maal T. A novel method for fusion of intra-oral scans and cone-beam computed tomography scans for orthognathic surgery planning. Craniomaxillofac Surg. 2016;44(2):160–6.

    Article  Google Scholar 

  7. Joda T, Gallucci GD, Wismeijer D, Zizmann NU. Augmented and virtual reality in in dental medicine: a systematic review. Comput Biol Med. 2019;108:93–100.

    Article  PubMed  Google Scholar 

  8. Maliha SG, Diaz-Siso JR, Plana NM, Torrie A, Flores RL. Haptic, physical and web-based simulators: are they underused in maxillary surgery training. J Oral Maxillofac Surg. 2018;76(11):2424.e1–2424.e11.

    Article  Google Scholar 

  9. Chen X, Hu J. A review of haptic simulator for oral and maxillofacial surgery based on virtual reality. Expert Rev Med devices. 2018;15(6):435–44.

    Article  PubMed  Google Scholar 

  10. Azarmehr I, Stokbro K, Bell RB, Thygesen T. Surgical navigation: a systematic review on indications, treatments, and outcomes in oral and maxillofacial surgery. J Oral Maxillofac Surg. 2017;75(9):1987–2005.

    Article  PubMed  Google Scholar 

  11. Lin HH, Lo LJ. Three-dimensional computer assisted surgical simulation and interoperative navigation in orthognathic surgery: a literature review. J Formosan Med Assoc. 2015;114(4):300–7.

    Article  PubMed  Google Scholar 

  12. Jayaratne YS, Zwehlen RA, Lo J, Tam SC, Cheung LK. Computer aided maxillofacial surgery: an update. Surg Innov. 2010;17(3):217–25.

    Article  PubMed  Google Scholar 

  13. Huang TK, Yang HS, Hsieh YH, Wang JC, Hung CC. Augmented reality (Ar) and virtual reality (VR) applied in dentistry. Kaohusing J Med Scie. 2018;34(2):243–8.

    Article  Google Scholar 

  14. Kwon HB, Park YS, Han JS. Augmented reality in dentistry; a current perspective. Acta Odontol Scand. 2018;76(7):497–503.

    Article  PubMed  Google Scholar 

  15. Holzinger D, Juergens P, Shahim K, Reyes M, Schicho K, Millesi G, Perisanidis C, Zeilhofer HF, Seemann R. Accuracy of soft tissue prediction in surgery-first concept in orthognathic surgery: a prospective study. J Cranio-maxillofac-Surg. 2018;46(9):1455–60.

    Article  Google Scholar 

  16. Metzeir P, Geiger EJ, Alcon A, Ma X, Steinbacher DM. Three-dimensional virtual surgery for free fibula mandibular reconstruction: planned versus actual results. J Oral Maxillofac Surg. 2014;72(12):2601–12.

    Article  Google Scholar 

  17. Hanken H, Schablowsky C, Smeets R, Heiland M, Riecke B, Nourwali I, Vorwig O, Grobe A, Al-Dam A. Virtual planning complex head and neck reconstruction results in satisfactory match between real outcomes and virtual models. Clin Oral Investig. 2015;19(3):647–56.

    Article  PubMed  Google Scholar 

  18. Maloney KD, Rutner T. Virtual surgical planning and hardware fabrication prior to open reduction and internal fixation of atrophic edentulous mandible fractures. Craniomaxillofac Traum Recontr. 2019;12(2):156–62.

    Article  Google Scholar 

  19. Nguyen A, Vanderbeek C, Herford AS, Thakker JS. Use of virtual planning and virtual database with intraoperative navigation to guide revision of complex facial fractures. J Oral Maxillofac Surg. 2019;77(4):790e1–790e17.

    Article  Google Scholar 

  20. Drake VE, Rizzi CJ, Greywoode JD, Vakharia KT. Midface fracture simulation and repair: a computer-based algorithm. Craniomaxillofac Trauma Reconstr. 2019;12(1):14–9.

    Article  PubMed  Google Scholar 

  21. Jemt T. A retro-prospective effectiveness study on 3448 implant operations at one referral clinic: A multifactorial analysis. Part II: Clinical factors associated to peri-implantitis surgery and late implant failures. Clin Implant Dent Res. 2017;19(6):972–9.

    Article  Google Scholar 

  22. D’souza KM, Aras MA. Types of implant surgical guides in dentistry: a review. J Oral Implantol. 2012;38(5):643–52.

    Article  PubMed  Google Scholar 

  23. Gulati M, Anand V, Salaria SK, Jain N, Gupta S. Copmuterized implant-dentistry: advances toward automation. J Indian Soc Periodontol. 2015;19(1):5–10.

    Article  PubMed  PubMed Central  Google Scholar 

  24. Holst S, Blatz MB, Eitner S. Precision for computer-guided implant placement: using 3D planning software and fixed intraoral reference points. J Oral Maxillofac Surg. 2007;65(3):393–9.

    Article  PubMed  Google Scholar 

  25. Sengul SV. Computer assisted implant dentistry: possibilities and limitations. In: Dibart S, Dibart JP, editors. Text Book of Practical Osseous Surgery in Periodontics and Implant Dentistry. 1st ed. UK: Wiley; 2011. p. 205–26.

    Google Scholar 

  26. Elian N, Jalbout ZN, Classi AJ, Wexler A, Sarment D, Tarnow DP. Precision of flapless implant placement using real-time surgical navigation: a case series. Int J Oral Maxillofac Implants. 2008;23(6):1123–7.

    PubMed  Google Scholar 

  27. Chang HW, Lin HH, Chortrakarrnkij P, Kim SG, Lo LJ. Intraoperative navigation for single splint two-jaw orthognathic surgery. From model to actual surgery. J Craniomaxillofac Surg. 2015;43(7):1119–26.

    Article  PubMed  Google Scholar 

  28. Badiali G, Roncani A, Bianchi A, Taddei F, Marchetti C, Schileo E. Navigation in orthognthic surgery: 3D accuracy. Facial Plast Surg. 2015;31(5):463–73.

    Article  PubMed  Google Scholar 

  29. Yu H, Shen SG, Wang X, Zhang L, Zhang S. The indication and application of computer-assisted navigation in oral and maxillofacial surgery- Shanghai’s experience based on 104 cases. J Craniomaxillofac Surg. 2013;41(8):770–4.

    Article  PubMed  Google Scholar 

  30. Zhu M, Liu F, Chai G, Pan JJ, Jiang T, Linh L, Xin Y, Zhang Y, Li Q. A novel augmented reality system for displaying alveolar nerve bundles in maxillofacial surgery. Sci Rep. 2017;7(42365):1–10.

    Google Scholar 

  31. Tran H, Suenaga H, Kuwana K, Dohi T, Nakajama S, Liao H. Augmented reality system for oral surgery using 3D auto stereoscopic visualization. Med Image Comput Comput Assist Interv. 2011;14(Pt 1):81–8.

    PubMed  Google Scholar 

  32. Pellegrino G, Mangano C, Mangano R, Ferri A, Taraschi V, Marchetti C. Augmented reality for dental implantology: a pilot clinical report of two cases. BMC Oral Health. 2019;19(158):1–8.

    Google Scholar 

  33. TE Z. 2015 Oculus Rift vs. Morpheus vs Vive VR; 2015.

    Google Scholar 

  34. GOOGLE. 2017. Daydream vr. Available: https://vr.google.com/daydream/ , Project Tango . Google. Available: https://get.google.com/tango/

    Google Scholar 

  35. SAMSUNG 2015 Samsung Gear VR. 2015.

    Google Scholar 

  36. GOOGLE 2015. Google cardboard.

    Google Scholar 

  37. CORP, H. T. C. 2015 HTC RE vive VR. 2015.

    Google Scholar 

  38. Lin Y, Chen H, Yu D, Zhang Y, Yuan W. A predictive bone drilling force model of haptic rendering with experimental validation using fresh cadaveric bone. Int J Comput Assist Radiol Surg. 2017;12(1):91–8.

    Article  PubMed  Google Scholar 

  39. Olsson P, Nysjo F, Hirsch JM, Carlbom IB. A haptic assisted cranio-maxillofacial surgery planning system for restoring skeletal anatomy in complex Rauma cases. Int J Comput Assist Radiol Surg. 2013;8(6):887–94.

    Article  PubMed  PubMed Central  Google Scholar 

  40. Wu F, Chen X, Lin Y, Wanf C, Wang X, Shen G, Qin J, Heng PAS. A virtual training system for maxillofacial surgery using advanced haptic feedback and immersive workbench. Int J Med Robot. 2014;10(1):78–87.

    Article  PubMed  Google Scholar 

  41. Pohlenz P, Grobe A, Petersik A, Von Sternberg N, Pflesser B, Pommert A, Hohne K-H, Tiede U, Springer I, Heiland M. Virtual dental surgery as a new educational tool in dental school. J Craniomaxillofac Surg. 2010;38(8):560–4.

    Article  PubMed  Google Scholar 

  42. Khelemsky R, Hill B, Buchbinder D. Validation of a novel congnitive simulator for orbital floor reconstruction. J Oral Maxillofac Surg. 2017;75(4):775–85.

    Article  PubMed  Google Scholar 

  43. Medellin-Castillo HI, Govea-Valladares EH, Perez-Guerroro CN, Gil-Valladares J, Lim T, Richie JM. The evaluation on a novel haptic-enabled virtual reality approach for computer aidded cephalometry. Comput Methods Prog Biomed. 2016;130:46–53.

    Article  Google Scholar 

  44. Anderson P, Chapman P, Ma M, Rea P. Real-time medical visualization of human head and neck anatomy and its applications for dental training and simulation. Current Med Imag. 2013;9(4):298–308.

    Article  Google Scholar 

  45. Wieiner CK, Skalen M, Harju-Jeanty D, Heymann R, Rosen A, Fors U, Lund B. Implementation of a web-based patient simulationm program to teach dental students in oral surgery. J Dent Edu. 2016;80(2):133–40.

    Google Scholar 

  46. Towers A, Field J, Stokes C, Maddock S, Martin N. A review of the use and application of virtual reality in pre-clinical dental education. Br Dent J. 2019;226(5):358–66.

    Article  PubMed  Google Scholar 

  47. Pulijala Y, Minhua E, Pears M, Peebles D, Ayoub A. Effectiveness of immersive virtual reality in surgical training - a randomized control trial. J Oral Maxillofac Surg. 2018;76(5):1065–72.

    Article  PubMed  Google Scholar 

  48. Elledge R, McAleer S, Thakar M, Begum F, Singhota S, Grew N. Use of a virtual learning environment for training maxillofacial emergencies: impact on the knowledge and attitudes of staff in accident and emergency department. Brit J Oral Maxillofac Surg. 2016;54(2):166–9.

    Article  Google Scholar 

  49. Yu H, Cheng G, Cheng A, Shen G. Preliminary study of virtual orthognathic surgical simulation and training. J Craniofac Surg. 2011;22(2):648–51.

    Article  PubMed  Google Scholar 

  50. Farronato M, Maspero C, Lanteri V, Fama A, Ferrati F, Pettenuzzo A, Farronato D. Current state of the art in the use of augmented reality in dentistry: a systematic review of the literature. BMC Oral Health. 2019;19(1):135.

    Article  PubMed  PubMed Central  Google Scholar 

Download references

Acknowledgements

Not applicable.

Funding

Not funding was required.

Author information

Authors and Affiliations

Authors

Contributions

The first author (AA) designed the study, reviewed the literature, and edited the manuscript. The second author (YP) conducted the original study on virtual and immersive reality, provided an insight on the relevant studies in the literature and offered some of the illustrations in the manuscript. Both authors read and approved the final manuscript.

Corresponding author

Correspondence to Ashraf Ayoub.

Ethics declarations

Ethics approval and consent to participate

Not required.

Consent for publication

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ayoub, A., Pulijala, Y. The application of virtual reality and augmented reality in Oral & Maxillofacial Surgery. BMC Oral Health 19, 238 (2019). https://doi.org/10.1186/s12903-019-0937-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12903-019-0937-8

Keywords